APC Smart UPS-1000VA-Tower-LCD 230V with SmartConnect Port
APC Smart-UPS 1000VA, Tower, LCD 230V with SmartConnect Port Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices..
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Provides remote power management of the UPS over the network.
Provides management of the UPS via a USB port (not available on all models).
Provides management of the UPS via a serial port.
Provides notification of changing utility power and UPS conditions.
LED status indicators
Quickly understand unit and power status with visual indicators.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
|Output power capacity||600 Watts / 1.0kVA|
|Output Connections||(8) IEC 60320 C13 (Battery Backup)|
|Nominal Output Voltage||230V|
|Nominal Input Voltage||230V|
|Input Connections||IEC 320 C14|
|Output Voltage Distortion||Less than 5 %|
|Output Frequency (sync to mains)||50/60 Hz +/- 3 Hz Sync to mains|
|Other Output Voltages||220, 240|
|Waveform type||Sine wave|
|Transfer Time||6 ms typical : 10 ms maximum|
|Input frequency||50/60 Hz +/- 3 Hz Auto-sensing|
|Input voltage range for main operations||170 - 300 Adjustable, 180 - 287V|
|Other Input Voltages||220, 240|
|Battery type||Lead-acid battery|
|Typical recharge time||3hour(s)|
|Expected Battery Life (years)||3 - 5|
|Battery Charge Power (Watts)||72 Watts|
|Interface Port(s)||RJ-45 Serial, USB|
|Control panel||Multifunction LCD status and control console|
|Audible Alarm||Alarm when on battery : distinctive low battery alarm : configurable delays|
|Surge energy rating||455Joules|
|Filtering||Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449|
|Operating Temperature||0 - 40 °C|
|Operating Relative Humidity||0 - 95 %|
|Maximum Height||219MM, 21.9CM|
|Maximum Width||171MM, 17.1CM|
|Maximum Depth||439MM, 43.9CM|
- RJ-45 Serial, USB
- Temperature Operating
- 0 - 40 °C
- Battery Life
- 3 - 5 Year
- Humidity Operating
- 0 - 95 %
- Input voltage
- Transfer Time
- 6 ms typical : 10 ms maximum
- Battery type
- Lead-acid battery
- Net weight
- Charging time
- Battery voltage
- 72 Watts
- 2 years
- control mode
- Multifunction LCD status and control console
- Input Frequency
- 50/60 Hz +/- 3 Hz Auto-sensing
- Output Voltage